Balluff BTL7-V50T-M P-C003 Series - Table of Contents

www.balluff.com 3english
BTL7-V50T-M ____ -P-C003
Micropulse Transducer in a Profile Housing
1
Notes to the user 4
1.1 Validity 4
1.2 Symbols and conventions 4
1.3 Scope of delivery 4
1.4 Approvals and markings 4
2
Safety 5
2.1 Intended use 5
2.2 General safety notes for the position measuring system 5
2.3 Explanation of the warnings 5
2.4 Disposal 5
3
Construction and function 6
3.1 Construction 6
3.2 Function 6
3.3 LED display 7
3.3.1 LED 1: BTL status 7
3.3.2 LED2: PROFINET status (dual LED) 7
3.3.3 LED3/LED4: Link/Activity 7
4
Installation and connection 8
4.1 Installing the transducer 8
4.2 Captive magnets 8
4.3 Floating magnets 9
4.4 Electrical connection 10
4.4.1 Connector BTL7-...-C003 10
4.5 Shielding and cable routing 10
5
Startup 11
5.1 Starting up the system 11
5.2 Operating notes 11
6
Technical data 12
6.1 Accuracy 12
6.2 Ambient conditions 12
6.3 Supply voltage (external) 12
6.4 Output 12
6.5 Dimensions, weights 12
6.6 Maximum sampling rate f
max
12
7
Accessories 13
7.1 Captive magnets 13
7.2 BTL2-GS10-_ _ _ _-A joint rod 13
7.3 Floating magnets 14
7.4 Connector 15
7.4.1 Power cable, preassembled with straight M8 plug 15
7.4.2 Power cable, preassembled with angled M8 plug 15
7.4.3 Data cable, preassembled with M12 plug 15
7.4.4 Data cable, preassembled with RJ45 plug 15
7.4.5 Straight data plug, freely configurable 16
7.4.6 Angled data plug, freely configurable 16
8
Type code breakdown 17
9
Appendix 18
9.1 Converting units of length 18
9.2 Part label 18