1.13 GenICam and advanced features 71
related to the image acquisition, including the triggering mode.
Additionally, MATRIX VISION offers numerous additional features like:
• mvShutterMode
which selects the shutter mode of the CMOS sensors like rolling shutter or global shutter.
• mvDefectivePixelEnable
which activates the sensor's defective pixel correction.
See also
https://www.matrix-vision.com/files/mv11/Glossary/art_image_errors←-
_sensors_en.pdf
• mvExposureAutoAverageGrey
common desired average grey value (in percent) used for Auto Gain Control (AGC) and Auto Exposure Control
(AEC).
• mvExposureAutoAOIMode
common AutoControl AOI used for Auto Gain Control (AGC), Auto Exposure Control (AEC) and Auto White
Balance (AWB).
Since
FW Revision 2.40.2546.0
Common properties for AutoExposureControl, AutoGainControl , and AutoWhiteBalance are available via mv Auto
Feature Control (p. 84).
For "Exposure Auto Mode", in wxPropView (p. 65) just select in "Exposure Auto" "Continuous". Afterwards, you
have the possibility to set lower and upper limit, average gray combined with AOI setting:
Figure 2: Acquire Control -> Exposure Auto
MATRIX VISION GmbH
To Next Page
Loading...
