Need help?Do you have a question about the Balluff MICROPULSE Series and is the answer not in the manual?
Product compliance with EMC Directive and testing standards.
Using STROBE for absolute position requests.
Field programming the Z pulse location via STROBE input.
General| Measurement Principle | Magnetostrictive |
|---|---|
| Output | Analog, Digital (SSI, Profibus) |
| Operating Voltage | 10 VDC to 30 VDC |
| Protection Class | IP67 |
| Temperature Range | -40°C to +85°C |
| Housing Material | Stainless steel or aluminum |
| Linearity | ±0.02% F.S. (depending on model) |
| Electrical Connection | M12 connector |
| Resolution | Up to 1 μm (depending on model) |
To Next Page