B&K 2245 - How to Change Display Settings; About Screen Settings; About Light Ring Brightness; About Measurement Display Settings

52
How to Change Display Settings
1.
Open the menu.
l
From the instrument: Press briefly to open the menu.
l
From the app: Tap to open the instrument menu.
2.
Go to: Display settings.
3. Adjust the screen settings:brightness and colour scheme.
4. Select the brightness of the light ring.
5.
Set up the displays for your measurements.
l
Go to SLM view to set up the instantaneous display (bar graph) and the readout for one broadband para-
meter
l
Go to List view to set up the instantaneous display (bar graph) and readouts for multiple broadband para-
meters (three on the instrument, five on the mobile app)
l
Go to Spectrum view to set up display of spectrum parameters
l
Go to Profile view to set up display of logged parameters
l Go to About data view to enable display of information about the data
About Screen Settings
Screen brightness: Choose from six levels of brightness.
Colour scheme: Choose light or dark.
About Light Ring Brightness
Light ring brightness controls the brightness of the light ring on the instrument. Choosefrom four settings:Off, Low,
Normal or High.
About Measurement Display Settings
l
Graph parameter (SLM view and List view)
Choose the parameter for the bar graph; that is, the instantaneous (or fast) display of instantaneous sound levels.
l
Parameter (Spectrum view)
Choose the parameter for the spectrum display; that is, the display of sound levels by frequency.
l
Parameter (Profile view)
Choose the parameter for the profile display; that is, the display of logged sound levels by time.
Set up the Instrument: Display Settings