B&K 2245 - Create a Project; Import Measurements

81
l For remote connections, the IP address or host name will depend on your setup. Refer to Remote Con-
nections for information about which IPaddress or host name to use
4. Click OK.
Create a Project
If you did not create a project using the mobile app, you can create a project in the PC app then import measurements
as needed.
You will need:
l The PC app installed on your computer
l Some measurements
Procedure:
1. Open the PC app.
2.
Click .
3.
Give the file a name and click Save.
The defaults are:
l Name: Untitled
l Location: C:\Users\USER\Documents\Enviro Noise Partner
You are now ready to add measurements to your project.
Import Measurements
Import measurements to add them to a project. You can add measurements to empty projects or to projects that
already contain measurements.
✐ Note: If you import multiple measurements with markers, the markers from different measurements that have the
same name will be treated as the same marker type upon import.
You will need:
l A project open in the PC app
l One or more measurements
Use the PC App: Create a Project