B&K 2245 - Import from a Backup; Add an Instrument Using Its IP Address

80
Import from a Backup
The first time you import from a backup, you will need to tell the PC app where the backup is stored.
You will need:
l An instrument that is set up to store a backup of its data, see Transfer Data
l Data in the backup
Procedure:
1.
In the import dialog, click .
2. Click Add NAS.
3.
Browse to the location of the backup.
✐ Note: Your computer will need to be able to access this location.
4. Select the folder with the matching serial number of your instrument.
5. Click Select Folder.
Add an Instrument Using its IPAddress
If you want to find an instrument that is not showing up in the list of discovered instruments, such as an instrument on
another network, you can manually add the instrument to the list using its IPaddress.
✐ Note: Use this functionality to connect to your instrument remotely.
1.
In the import dialog, click .
2. Click Add instrument from IP address.
3.
Enter the IP address or host name.
Enter the IP address or host name, and if used, the password.
l For local connections, you can find the IPaddress of the instrument here:Menu > System settings > Net-
work settings > Wi-Fi settings or Ethernet settings
Use the PC App: Import a Project