90
Add a Marker
You can add markers to a measurement in the PC app.
1. Select a range.
2. Right-click.
3. Mouse over Add Marker.
4. Select the desired marker from the submenu.
ā Note: Edit marker names and their functions at any time in Marker Settings.
Select a Marker
In the lower graph, click on the coloured bar at the top of the marked region to select the marker.
When you select a marker, you can view any frequency analysis data for that marker in the Spectrum view.
Adjust the Cursors
Change the boundaries of the marker using the PC app.
1. Select a marker.
2. Click and drag the cursors as needed.
Delete a Marker
1. Right-click on a marker.
2. Select Delete Marker to remove the marker from the measurement.
Change a Marker
1. Right-click on a marker.
2. Mouse over Change Marker to open a menu of markers.
3. Select the desired marker.
Change Marker Settings
Use the Marker Settings window to edit marker settings.
l Double-click on a name to change it.
l Click on the colour square to select a new colour or define a custom colour.
l Change the type of marker using the drop-down menu.
Marker Calculations
The PC app will calculate decibel (dB) levels for each individual marker and for all markers of the same type. You can
view these values in the table view of the Measurement window.
Use the PC App: Examine the Project
To Next Page
