To Next PageTo Next Page
Need help?Do you have a question about the B&R MAPPC700A-ENG and is the answer not in the manual?
General| Product Type | Touch Panel |
|---|---|
| Resolution | 800 x 480 pixels |
| Operating System | Windows Embedded Compact 7 |
| Processor | Intel Atom E3845 |
| Power Supply | 24 V DC |
| Touch Technology | Resistive |
| Communication Interfaces | Ethernet, USB, RS232 |
| IP Rating | IP65 |
| Display Size | 7 inches |
Provides a historical log of manual revisions, including version, date, and changes.
Details intended use, protection against electrostatic discharge, policy, procedures, transport, storage, installation, and operation safety.
Explains the structure of safety notices in the manual (Danger, Caution, Warning, Information).
Lists system units, CPU boards, heat sinks, and main memory with their respective model numbers and short descriptions.
Describes typical system configurations for central control and visualization, including networking and I/O systems.
Introduces the Panel PC 700 as an industrial PC and display combined, detailing its variants and connectivity.
Lists key features of the Panel PC 700, including processor, memory, interfaces, and operation modes.
Explains how the PPC700 system is assembled and lists essential components for operation.
Discusses ambient temperature specifications with X945 CPU boards, including worst-case conditions and derating.
Details minimum and maximum relative humidity for individual components and the entire device.
Presents block diagrams for supply voltage and revision-dependent configurations for power management.
Illustrates and describes the general and optional device interfaces available on the Panel PC 700 unit.
Covers how to mount Panel PC 700 devices in housing cutouts using clamps and lists necessary tools and torque specifications.
Provides critical mounting guidelines regarding environmental conditions, planar surface, closed rooms, sunlight, ventilation, orientations, weight support, and cable flex radius.
Explains the importance of proper air circulation and specifies the required free space around the Panel PC 700.
Displays the specified mounting orientation for the Panel PC 700 device.
Advises against using a flex radius smaller than the specified minimum value when making cable connections.
Explains functional ground connections, minimum cross-section requirements for cables, and the importance of line shielding.
Details touch screen calibration procedures for Windows XP Professional, Windows CE, Windows XP Embedded, and Automation Runtime.
Offers an overview of configuration possibilities for connecting analog RGB devices and answers questions regarding BIOS settings.
Guides the user through entering the BIOS "RAID Configuration Utility" to make necessary settings for creating RAID sets.
Describes BIOS settings available for X945 CPU boards, including general information and setup/boot procedures.
Covers advanced BIOS settings including ACPI, PCI, Graphics, CPU, Chipset, I/O, Clock, IDE, USB, Keyboard/Mouse, Remote Access, CPU board monitor, and Baseboard/Panel features.
Explains how to load setup defaults and provides an overview of BIOS default settings based on DIP switch positions.
Provides information on upgrading BIOS and firmware, including what information is needed and potential issues.
Details the advantages and supported versions of Automation Runtime for the Panel PC 700.
Provides information on Windows XP Professional, including its discontinuation of support and model numbers.
Covers installation procedures and driver information for Windows 7 on Panel PC 700.
Describes Windows XP Embedded, its general information, features with FP2007, installation, and touch screen driver.
Provides general information and features of Windows Embedded Standard 2009 for Panel PC 700.
Details general information, features, installation, and drivers for Windows Embedded Standard 7 on Panel PC 700.
Covers general information and features of Windows CE 6.0, including requirements and installation.
Explains the ADI driver's function, how to access settings via B&R Control Center, and its features.
Describes how to change display's SDL equalizer settings for optimal cable length and display quality.
Lists applicable European directives including EMC, Low-voltage, and Machine directives.
Provides an overview of various EN and CFR standards related to electromagnetic compatibility, environmental testing, safety, and immunity.
Details network-related emissions and general electromagnetic emissions, including test methods and limits according to various standards.
Outlines requirements for immunity to disturbances, including ESD, HF fields, transient electrical disturbances, surges, conducted disturbances, magnetic fields, voltage dips, and damped vibration.
Covers mechanical conditions such as vibration operation, transport, shock, toppling, and free fall, with associated test requirements.
Details climate conditions including worst-case operation, dry heat, dry cold, temperature fluctuations, humid heat cyclic, and humid heat constant (storage).
Covers safety aspects like ground resistance, insulation resistance, high voltage, residual voltage, overload, defective component, and voltage range.
Lists various accessories available, including batteries, power supplies, UPS, interface covers, adapters, cables, and drives.
Explains the function of lithium batteries for buffering BIOS and RTC, their replacement, and provides order data and technical specifications.
Describes the 3-pin terminal block for connecting supply voltage, including general information, order data, and technical specifications.
Details available B&R power supplies, including single-phase and three-phase options with technical overview.
Explains the requirements for external UPS supply, including charging unit, battery unit, and null modem cable for data exchange.
Describes interface covers that protect interfaces from dirt and dust when not in use, providing order data and contents of delivery.
Explains the DVI-I adapter for connecting a standard monitor to the DVI-I interface.
Describes the front side USB port cap for Automation Panel and Panel PC devices, now discontinued.
Details USB port caps for Automation Panel, Panel PC 700, and Panel PC 800 devices, including order data and height specifications.
Provides general information, order data, technical data, and benchmark comparisons for 512MB to 32GB CompactFlash cards.
Details general information, order data, technical data, temperature humidity diagrams, and dimensions for 512MB to 16GB CompactFlash cards.
Covers general information, order data, technical data, temperature humidity diagrams, and dimensions for 64MB to 8192MB CompactFlash cards.
Lists features, technical data, dimensions, cutout installation, contents of delivery, interfaces, installation, and mounting orientation for the USB Media Drive.
Provides general information, order data, and technical data for USB flash drives, including temperature humidity diagrams.
Describes the content of the HMI Drivers & Utilities DVD, including drivers, utilities, software upgrades, and BIOS upgrades for various B&R products.
Details DVI cables, SDL cables, SDL flex cables, and RS232 cables, including order data, technical data, cable specifications, and pin assignments.
Describes replacement fan kits for Panel PC 700 system units with different PCI slot configurations.
Explains the function and technical data of the 512 KB SRAM module and its installation.
Details PCI Ethernet cards, including technical data, driver support, and dimensions for 10/100 Mbit/s cards.
Describes how to change the lithium battery for buffering BIOS and RTC, including battery check, order data, technical data, and disposal information.
Provides step-by-step procedures for installing and replacing fan kits in PPC700 units with and without PCI slots, including warnings and markings.
Explains the procedure for installing and exchanging slide-in drives in PPC700 system units with PCI slots, including side cover removal and drive insertion.
Details how to exchange legend strips for function keys on the Panel PC 700 device.
Offers tips to reduce image sticking and burn-in effects on LCD/TFT monitors, including causes and avoidance measures.
Provides a step-by-step procedure for exchanging a defective secondary hard disk (HDD1) in a PCI SATA RAID controller, including necessary tools and screw assignments.
Identifies the locations of temperature sensors within the PPC700 and how to read temperature values in BIOS or Windows.
Explains the MTCX controller's location and its responsibilities for monitoring and control functions, including firmware upgrades.
Describes the B&R Key Editor tool for adjusting function keys and LEDs for application software, listing supported systems and features.
Explains the ADI development kit software for activating B&R device functions from Windows applications, listing supported tools, system requirements, and features.
Details the ADI .NET SDK software for activating ADI functions from .NET applications, listing supported programming languages and system requirements.
Provides technical data for the Elo Accu Touch screen, including accuracy, response time, resolution, light permeability, environmental conditions, and drivers.
Lists technical data for the AMT Touch screen, covering manufacturer, release pressure, light permeability, environmental conditions, lifespan, activation, and drivers.
States that the décor foil conforms to DIN 42115 and describes its chemical resistance.
Mentions that viewing angle information can be found in the technical data for individual components.
Provides a glossary of terms used in the manual.
