Technical data • Entire device
Chapter 2
Technical data
91Panel PC 700 with 945GME N270 CPU board User's Manual V 1.16
2.4.18 Hardware security key
B&R recommends a hardware security key (dongle) based on the DS1425 from MAXIM
(previously Dallas Semiconductors) for software copy protection.
I/O address and IRQ
The setting for the I/O address and the IRQ can be changed in the BIOS Setup ("Advanced" /
"I/O Device Configuration" / "Parallel port").
Hardware security key
A hardware security key (dongle) can be inserted behind the
black cover.
Table 48: Hardware security key
Warning!
Turn off power before removing or adding the hardware security key.
Resource Default setting Additional setting options
I/O address 378 278, 3BC
IRQ - -
Table 49: Hardware security key - I/O address and IRQ
To Next Page