484
Appendix A • Membrane
Panel PC 700 with 945GME N270 CPU board User's Manual V 1.16
8. Membrane
The décor foil conforms to DIN 42115 (section 2). This means it is resistant to exposure to the
following chemicals for a 24-hour period with no visible signs of damage:
The décor foil conforms to DIN 42115 section 2 for exposure to glacial acetic acid for less than
one hour without visible damage.
Information:
The following characteristics, features, and limit values only apply to this individual
component and can deviate from those specified for the entire device.
Ethanol
Cyclohexanol
Diacetone alcohol
Glycol
Isopropanol
Glycerine
Methanol
Triacetin
Dowandol
DRM/PM
Formaldehyde 37 - 42%
Acetaldehyde
Aliphatic hydrocarbons
Toluene
Xylene
White spirits
Trichloroethane
Ethyl acetate
Diethyl ether
N-Butyl acetate
Amyl acetate
Butylcellosolve
Ether
Acetone
Methyl ethyl ketone
Dioxan
Cyclohexanone
MIBK
Isophorone
Formic acid <50%
Acetic acid <50%
Phosphoric acid <30%
Hydrochloric acid <36%
Nitric acid <10%
Trichloracetic acid <50%
Sulphuric acid <10%
Sodium hypochlorite <20%
Hydrogen peroxide <25%
Potassium carbonate
Washing agents
Tenside
Fabric conditioner
Ferrous chloride (FeCl2)
Ferrous chloride (FeCl3)
Dibutyl phthalate
Dioctyl phthalate
Sodium carbonate
Ammonia <40%
Caustic soda <40%
Potassium hydroxide
Alkali carbonate
Bichromate
Potassium
Acetonitrile
Sodium bisulphate
Cutting oil
Diesel oil
Linseed oil
Paraffin oil
Blown castor oil
Silicon oil
Turpentine oil substitute
Universal brake fluid
Aviation fuel
Gasoline
Water
Sea water
Decon
Table 261: Chemical resistance of the décor foil
To Next Page