Bang & Olufsen BeoLink NL/ML - Setting Up the Network; Network Link Configuration

Setting up the Network 7
BeoPlay V1 (Bedroom)
- LINK TO OTHER PRODUCTS: Select BeoLink Converter NL/ML (Select the product to be distributed from. In this setup the sources are distributed
from the Audio Master (BeoMaster5) via the BeoLink Converter NL/ML).
- IS BeoLink Converter NL/ML IN THE SAME ROOM AS THIS TELEVISION?: Select NO. (Select whether or not the Audio Master (BeoMaster5)
and not the BeoLink Converter NL/ML is in the same room as the TV).
- VM OPTION: Select option 2. (This setting is only relevant for Beo4 remote).
! Network Link products connected to the BeoLink Converter NL/ML must be switched on to make it possible for the BeoLink Converter NL/ML to
detect them automatically. Master Link sources that are not present in the system has to be removed manually in the Conguration menu under
Experience mapped to NL.
! The NL/ML Delay Box is optional. Mount a NL/ML Delay Box for echo free audio source distribution.
Setting up the Network
Network Link
An extra router (Network Link router) is recommended for the Network Link as it needs it’s own subnet.
The WAN port on the Network Link router must be connected to a LAN port on the ISP router with a CAT7 cable. This is done to avoid that data
trafcmeantforthe1stsubnetwillinterferewithdatatrafconthe2ndsubnet.
The Bang & Olufsen products can be connected to any of the LAN ports on the Network Link router. Each of the four ports on the Network Link
router can be extended with a switch recommended by Bang & Olufsen.
Access the Network Link router
InorderfortheNetworkLinkroutertoworkwhenconnectedtotheexistingnetwork,itmustbeconguredwithadifferentaddressrangethan
the ISP router on the network.
- ConnectaPCtotheNetworkLinkrouterandenterthedefaultIP-address192.168.1.1intheaddresseldintheWebbrowseronthePC.
- Enter User Name: admin and Password: admin. (If a Network Link router is already installed the User name and Password might be changed).
Set up a Bang & Olufsen sub-network
- Access the Network Link router
- Go to Basic Setup screen, Network Setup and Router Address.
- Enter the IP address to 192.168.100.1 and save the settings
The Bang & Olufsen sub-network has now been setup. All devices connected to this sub-network must have the IP address 192.168.100.XXX.
The last three digits in the IP address are unique.