R5900103 /00 C-10, C-588
Google Cast does not support a passcode.
Google Cast can only be used when the clock of the Base Unit is set correctly. If not Google Cast
cannot make a connection with the Base Unit.
About streaming via Miracast™
Miracast™ enables seamless display of multimedia content between Miracast® devices. Miracast allows
users to wirelessly share multimedia, including high-resolution pictures and high-definition (HD) video content
between Wi-Fi devices, even if a Wi-Fi network is not available.
Miracast sets up its own network to stream information and display it via ClickShare so there is no need for a
direct connection with the Base Unit. Miracast must be activated on your device. For more information about
activating Miracast, consult the user guide of your device.
The supported versions of Miracast can be found on Barco’s website, www.barco.com\clickshare. The support
of non-released version of these protocols cannot be guaranteed by Barco.
To be able to use Miracast, you need to disable the access point and integrate the Buttons into the
corporate network.
Passcode type selection
1. Log in to the Configurator.
2. Click Wi-Fi & Network → Services.
Image 6–27 Services, mobile devices
3. To allow sharing content via ClickShare app, Sharing via ClickShare app is activated by default and cannot
be changed.
To allow streaming via AirPlay, check the check box in front of Streaming via AirPlay.
To allow streaming (mirroring) via Google Cast, check the check box in front of Streaming via Google Cast.
Google cast does not support a passcode.
To allow streaming via Miracast, check the check box in front of Streaming via Miracast.
4. Click on the drop down box and select the desired passcode type.
• No passcode
• Numeric passcode
C-10, C-5 Configurator
To Next Page
Loading...
Need help?
General
