5. Driver and software features
Image 5-2
Supported display controllers
When driven by an MXRT-x500 or later display controller, AAM can be enabled on selected Barco Coronis,
Nio, and Mammography displays. These include the MDCC-6430, MDCC-6330, MDCC-4330, MDCC-
4230, MDNC-6121, and MDMC-12133.
5.2.2 O peration
Using Application Appearance Manager
Select each desired application and add it to the list of managed applications. Independently edit the
luminance and color profile for each managed application.
Certain applications can be blocked from being managed by AAM. In the directory C:\Program
Files\Barco\ProductivityTools, open the AAMBlackList.txt file. Enter the name of the
application executable, and after rebooting the system, the application will not appear in AAM.Ifthe
name of the executable isn’t known, launch the application, enable AAM, and note the name of the
executable from the unmanaged list. Administrative rights are requi
redtoeditthefile.
5.2.3 Configuration
Configuring color management
• Enable: This check box will enable or disable the Application Appearance Manager.
• Running a pps not managed by AAM: Application Appearance Manager detects these applications
running on Windows. It is not modifying the appearance of these applications. To add one of these to
the managed list, select it and press the Add button.
• Apps managed by AAM: The Application Appearance Manager is managing the applications on this
list. Select an application on this list and use the sliders to change that application’s color profile or
luminance value. To remove an item from the managed list, select it and press the Remove button.
• Output Color Profile: Change the color profile of the selected managed application by selecting from
this list.
Color profile selection is only available on Coronis Uniti displays that are calibrated with
QAWeb 1.13.01 or later and MDNC-6121 displays that are calibrated with QAWeb 1.13.10
or later.
• Luminance: Change the luminance of the selected managed application with this slider. Although
the slider will allow entry up to 1000 candela, the maximum luminance is the calibration luminance of
the display showing the application window. The minimum luminance is 250 candela.
5.3 Conference CloneView
5.3.1 Description
Overview
This feature allows the user to clone the images sent to one or more displays to other displays or projectors
attached to the same Barco Display Controller. CloneView supports zooming and panning on the cloned
image(s) for ease of viewing.
K5905271 DISPLAY CONTROLLER 27/02/2017
23
To Next Page
Loading...