Parts, controls and connectors
20 System manual Nio 5MP
Rear
Figure 2
1. Connector compartment cover
To get access to the connectors, remove the cover by
pulling down the 2 clips at the top of the cover.
2. Tilt & swivel foot cover
This cover is packed in a separate box when the
display is shipped to the customer.
3. Tilt & swivel foot
4. USB downstream port
When the display is connected to the PC USB bus,
you can connect USB devices, such as keyboard,
mouse, digital camera, to this connector.
5. USB upstream port
Connect this connector to the PC USB bus if you wish
to connect USB devices to the display’s USB
downstream port.
6. DVI (digital) video input
!
"
#
$% & '
(
To Next Page
Loading...
