Parts, controls and connectors
System manual Nio 5MP 19
Parts, controls and connectors
Front
Figure 1
1. Power LED
The LED is off when the display is disconnected from
the power. The LED is also off when the LED function
is disabled in the on-screen display (OSD).
The LED is green when the display is on (when
enabled in the on-screen menus).
The LED is orange when the display is in Stand-by
power-saving mode.
2. USB downstream port. See also item “4.” on page 20
3. Control wheel
The control wheel can be pushed like a push button
and turned like a knob.
It allows to put the display in stand-by, navigate
through the on-screen display (OSD) menus and
change values in the OSD.
BARCO
!
"
#
To Next Page
Loading...
