Display operation
72 System manual Nio 5MP
Complete OSD overview
Main menu
Luminance
Settings
Name Description
Luminance Adjust the target luminance to which the dis-
play will be stabilized.
Settings Change settings for DPMS, Power LED and
User Controls
Information Read information about the display
Name Description
Luminance Target Manually adjust the luminance
The calibrated luminance is indicated as
100%
Name Description
DPMS Switch on/off the automatic power
saving system (DPMS)
Power LED Switch the power LED on/off. Note:
The LED's orange DPMS state is not
influenced by this setting. So, when
the display goes into power-saving
mode, the LED will turn orange,
even if it was switched off by this
setting.
User Controls Disable the control wheel functions
To Next Page
Loading...
