Software installation
System manual Nio 5MP 43
Figure 20: BarcoMed Nio-DualView Disabled, monitor 2
represents the two displays connected to a single BarcoMed Nio
controller.
Caution: If you install the BarcoMed Nio driver with
DualView disabled, Windows will still show two devices
installed for each BarcoMed Nio Display Controller
installed under “Display Adapters” in the “Device
Manager Control Panel”. The second device will be
disabled. This is normal. Do NOT
try to enable any of the
disabled display adapters. If you wish to enable
DualView, you will need to reinstall the drivers with the
“Enable the DualView device?” checkbox checked.
Palette modes
You can choose one of the three following Palette Modes:
•User Modifiable
To Next Page
Loading...
