NioWatch operation
System manual Nio 5MP 65
• Select the Graphic Board tab to view information
about the display controller.
• To select another display function, select an item
from the Display Function drop-down box.
If you select DICOM Optimized, you will be able to
adjust your grayscales using a wizard (see below).
• To adjust display luminance, adjust the Luminance
slider.
DICOM Optimizer wizard
1. When you have selected the DICOM Optimized
display function, the following window appears:
Figure 36
2. Adjust the slider until there is almost no visible
difference between the background of the image
above the slider and the bitmap inside this image.
3. When done, click button Set point 1 of 20.
4. Repeat this procedure until the button is grayed. This
indicates the last point is set.
5. Click OK to finish.
To Next Page
Loading...
