- 2 -
CONTENTS
1. INTRODUCTION..............................................................................................5
1.1 Features...................................................................................................................6
1.2 Specifications.........................................................................................................6
1.3 Applications............................................................................................................6
2. HARDWARE....................................................................................................7
2.1 Mechanical Drawing – Overview...........................................................................7
2.2 Connectors..............................................................................................................8
2.2.1. Power...................................................................................................................9
2.2.2. LAN 1....................................................................................................................9
2.2.3. LAN 2....................................................................................................................10
2.2.4. GPS (optional)......................................................................................................10
2.2.5. Relays...................................................................................................................10
2.3 Status LEDs............................................................................................................10
2.3.1. List of errors and warnings...................................................................................10
2.4 Opening the Lid......................................................................................................11
2.4.1. Internal display.....................................................................................................13
2.4.2. MEMS acceleration sensor..................................................................................14
2.4.3. SD Flash Card......................................................................................................15
2.4.4. Real-time clock with internal backup-battery........................................................15
2.4.5. Battery..................................................................................................................16
2.4.6. ST connectors......................................................................................................16
2.4.7. Device switch.......................................................................................................16
2.4.8. Relays...................................................................................................................17
2.4.9. AC/DC converter..................................................................................................17
2.4.10. DC board............................................................................................................18
2.4.11. Terminal label......................................................................................................18
2.4.12. Axis orientation...................................................................................................20
2.4.13. Installation..........................................................................................................20
3. SET-UP of the MR3000SB..............................................................................23
3.1 Connecting to the SB for the first time (direct connection)...............................23
3.1.1. Wired connection via router..................................................................................23
3.1.2. Wired connection without router...........................................................................24
3.2 Connecting to the MR3000SB in the field (remote connection).........................25
4. OPERATING WITH THE MR3000SB..............................................................27
4.1 Preparing the SB for field use...............................................................................27
4.1.1. Initial settings........................................................................................................27
4.1.2. Network settings...................................................................................................29
MR3000SB_v20x_rev1.odt subject to technical change without notice
To Next Page
Loading...
