56
5.3.11. Maintenance
Here you may generate a report of the system to make further investigations in case of trouble. The
report is automatically downloaded to your PC.
NOTE: The log files and other variables used to generate the Diagnostic report are in volatile
memory, do not switch of the SB before the report is generated. Make a report as
soon as a problem has been encountered. If you wait for too long time, the interesting
part of the log file might be overwritten.
The Reboot button initiates a warm start of the SB.
The User Parameters section is useful to import user parameters defined in other devices (or even
in the same device), and to export them for future use. During the import phase, you can choose
between a standard import operation, with all the parameters, and a custom importation, where you
select not to modify the current WLAN setting, all the name and comment settings, and the ftp
parameters.
IMPORTANT: If the parameters must be imported from MR1 to MR2, it is necessary that MR2 have
the same firmware version of MR1 or a more recent version.
Figure 5.3.11. Subsection dedicated to the Maintenance.
To Next Page
Loading...
Need help?
General
