Bartec Syscom MR3000C User Manual

31
Figure 4.1.5. Subsection dedicated to the common alarms.
Successively, in the Common Alarm section, you define the conditions for the voting logic. The
procedure is exactly the same as for the common trigger. Make sure to activate the Common
Alarm in the tab Contacts to get a message if there is a common alarm.
4.1.3. Alerts
In case of Internet access, the alarm notification can be sent by e-mail to anybody. For further
details, please look at Subsection 5.4.4.
Figure 4.1.6. Set up of the mail sending.

Bartec Syscom MR3000C Specifications

General

Category	Measuring Instruments
Type	Seismic Recorder
Channels	3
GPS Synchronization	Yes
Data Storage	Internal Flash Memory
Communication Interface	Ethernet, USB
Operating Temperature	-20°C to +60°C
Protection Class	IP67
Resolution	24 bit
Sampling Rate	Up to 1000 samples per second
Accuracy	0.1%
Response Time	1 ms