EasyManuals Logo

Bartec Syscom MR3000C User Manual

Default Icon
81 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #80 background imageLoading...
Page #80 background image
80
- Unplug the mains plug and clean it regularly. If the plug is covered with dust and it picks up moisture, its
insulation may deteriorate, which could result in a fire.
Note
- Do not use the supplied mains lead on any other equipment.
- Do not pinch, bend or twist the mains lead excessively. The core conductors may be damaged, exposed or
broken.
- Do not modify the mains lead.
- Do not put anything heavy on the mains lead.
- Do not pull on the mains lead itself when disconnecting the mains lead.
- Do not connect too many appliances to the same mains socket.
- Do not use a poor fitting mains socket.
Prohibited Usage
Do not install the product in locations, environments or situations such as those listed below or the product
may malfunction and cause a fire, electrical shock, damage and/or injuries.
Location
- Do not place the product under water.
- Avoid moving the product from a cold area to a warm area. Sudden surrounding temperature changes may
cause moisture condensation. This may cause the product to show malfunctions.
Environment
- Do not place the product in a room with oily smoke or steam. Fire, electric shock or warping may result.
- Do not heat the case of a product with an internal lead battery above 50°C. Such condition may damage the
internal lead battery casing.
Situation
- Do not use the product when your hands are wet, with the cover removed or with attachments not
recommended by the manufacturer.
- Disconnect the product from mains socket during lightning storms.
- Do not install the product so that it impair travelling along usual paths. Injury or damage to a person or
object bumping into the product may result.
Broken pieces
- Do not throw anything at the product. The impact may break an antenna, a connector or the screen glass
(when present).
For children
- Do not allow children to play near the product.
- Keep small accessories out of the reach of children, so they are not mistakenly swallowed.
Description
This product is a vibration measuring instrument. It can be equiped with a Wi-Fi interface and/or a GPRS
interface (according to configuration).
The Wi-Fi interface is intended for product configuration.
The GPRS interface is mainly intended for data transfer.
This product uses internationally harmonised frequencies.
This product may be used in a domestic or industrial environment.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Bartec Syscom MR3000C and is the answer not in the manual?

Bartec Syscom MR3000C Specifications

General IconGeneral
BrandBartec
ModelSyscom MR3000C
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals