Basler DECS-150 User Manual

9492600990 10-19
DECS-150 Grid Code
Grid Code Test settings provide a means to artificially bias measured grid voltage and frequency for
testing grid code functionality.
The values of the Frequency Bias and Voltage Bias settings bias the measured grid frequency and
voltage. These biases become active when the Send to Device button is clicked.
The Test Meter setting establishes which signal will be recorded in the Analysis (real time monitor) screen
when Grid Code Test Signal is the selected test parameter.
The duration of the grid code test is established by the Max Time For Testing setting. This timer begins
when the Send to Device button is clicked. When the timer expires, the frequency and voltage biases are
no longer applied.
Figure 10-22. Grid Code Test Screen

Basler DECS-150 Specifications

General

Brand	Basler
Model	DECS-150
Category	Control Systems
Language	English