Safety Information
8 V-Controller (BUS 6 VC)
5.03047.01 Baumüller Nürnberg Electronic GmbH & Co. KG
Qualified Personnel
In the context of the safety-specific information in this document or on the products themselves, quali-
fied personnel are considered to be persons who are familiar with setting up, assembling, commission-
ing and operating the product and who have qualifications appropriate to their activities:
Trained or instructed or authorized to commission, ground and mark circuits and equipment in accor-
dance with recognized safety standards.
Trained or instructed in accordance with recognized safety standards in the care and use of appropri-
ate safety equipment.
Appropriate Use
NOTE
This draws your attention to important information about the product, handling of the product or to a
particular section of the documentation.
WARNING
You may only use the equipment/system for the purposes specified in the operating instructions and
in conjunction with the third-party equipment and components recommended or authorized by BAU
-
MÜLLER NÜRNBERG GmbH.
For safety reasons, you must not change or add components on/to the equipment/system.
The machine minder must report immediately any changes that occur which adversely affect the safety
of the equipment/system.