Maintenance
96 V-Controller (BUS 6 VC)
5.03047.01 Baumüller Nürnberg Electronic GmbH & Co. KG
8.3 Disposal
For the most part, the equipment consists of the following components and materials:
For technical reasons, electronic components might need to contain dangerous materials, so you should
not open them.
If the components are used correctly, there is no danger to human beings or to the environment.
In case of fire, dangerous compounds may result or hazardous materials may be released.
You must dispose of or recycle equipment or components according to national regulations as well as
any applicable local or regional ordinances.
Component Material
Various spacers, housing of current converter and unit fan,
etc.
Plastic
PCBs on which all the open- and closed-loop electronics are
mounted
Base material: Epoxy-resin fiberglass woven
material, copper-coated on both sides and
plated-through, various electronic components
such as condensors, resistors, relays, semi
-
conductors, etc.
To Next Page
Loading...
