Installation
24 V-Controller (BUS 6 VC)
5.03047.01 Baumüller Nürnberg Electronic GmbH & Co. KG
Analog/Digital Interface
X26 SUB-D socket 25 pin
Buchse
Pin no. Assignment
1 analog input 1, differential signal +
2 analog input 1, differential signal -
3 analog input 2, differential signal +
4 analog input 2, differential signal -
5 analog power supply, + 15 V
6 analog power supply, analog reference potential
7 analog output 1
8 analog output 2
9 must not be connected !
10 must not be connected !
11 bbo relay break contact ready for use
12 bbk relay changeover contact ready for use
13 bbs relay make contact ready for use
14 pulse enabling (24 V)
15 digital input 1 (24 V)
(freely programmable)
16 digital input 2 (24 V)
(freely programmable)
17 digital input 3 (24 V)
(programmed with reset error)
18 digital input 4 (24 V)
(freely programmable)
19 must not be connected !
20 ground for digital inputs 1 to 4
21 digital output 1 (24 V)
(freely programmable)
22 digitaler output 2 (24 V)
(ready for pulse enabling)
23 digitaler output 3 (24 V
(main contactor on)
24 ground digital outputs 1 to 3
25 +24 V for digital inputs 1 to 4,
pulse enabling and
digital outputs 1 to 3
NOTE
A secure separation must be ensured externally.
To Next Page
Loading...