Commissioning
28 V-Controller (BUS 6 VC)
5.03047.01 Baumüller Nürnberg Electronic GmbH & Co. KG
WARNING
Before switching on the drive, you must carefully check the functions of all the higher level safety
equipment to prevent injury to people.
Contact protection in accordance with paragraph 4 Section 4 VBG 4
Protection against direct contact comprises all the measures against danger that can result from tou-
ching the active parts of electrical equipment.
You must therefore protect the active parts from being touched by means of insulation, the construc-
tion and arrangement of the equipment or permanently mounted guards. The guards in question are
standard covers, barriers and procedures that guarantee that people cannot touch active parts that are
carrying power.
Switching cabinets must have an emergency off facility to switch off any voltages that could be dan-
gerous. This does not include equipment which, if switched off, would cause an even more dangerous
situation. The emergency off releasing element must be arranged in such a way that it can be reached
quickly in case of danger. In the case of work that is considerably more dangerous than usual, another
person must be present.
The machine minder must ensure that unauthorized people do not work at the machine.
To Next Page
Loading...