Parameter
58 V-Controller (BUS 6 VC)
5.03047.01 Baumüller Nürnberg Electronic GmbH & Co. KG
P627 I current delta max
Exceed the absolute value of the control deviation the value set with this parameter, bit no. 3
ist set in parameter P616 (BUC control word).
P628 I delta ISQ
This parameter displays the control deviation of the active current controller (IQ).
P629 I delta ISD
This parameter displays the control deviation of the reactive current controller (ID).
P630 I IQ set smoothing time
Active current set value (IQ) smoothing. The time constant of a digital PT1 can be set here.
P631 MM U mains alpha ( cos(ωt) )
U mains alpha = U
L12
The value of the mains phase to phase voltage is displayed.
P632 MM U mains beta ( sin(ωt) )
U mains beta = U
L13
+ U
L12
The value of the mains phase to phase voltage is displayed.
P633 MM mains voltage eff.
The effective value of the mains phase to phase voltage is displayed.
P634 MM effective power
The smoothed value (265 ms) of the effective power ( (+) taken from the mains or (-) feed
back power).
NOTE
No error is generated!
Standardization: 100 % ↔ P116 (PU I limit)
Standardization: 100 % ↔ P116 (PU I limit)
Standardization: 100 % ↔ 1000 [V]
Standardization: 100 % ↔ 1000 [V]
2–
3
-------
1
3
-------
To Next Page
Loading...