Baumuller BUS 6 VC - Page 87

Parameter
V-Controller (BUS 6 VC) 85
Baumüller Nürnberg Electronic GmbH & Co. KG 5.03047.01
Example:
1.First set DO 1 source Pxxx to 13,
DO 1 bit pattern to 0001,
and DO 1 bit selection to 0003.
→ if bit no. 1 and bit no. 2 of parameter P013 result in „1“, the output 1 is switched to high.
Parameter overview
Parameter description
P383 DO 1 source Pxxx
This parameter indicates the parameter number of the source parameter for outputs 1, 2 or 3.
P384 DO 1 bit selection
The bits to be compared are selected in the source parameter.
P385 DO 1 bit pattern
Bit pattern which is compared to the source parameter bit pattern.
P392 DO state
This parameter shows the state of the function module.
Parameter Name Range
min. ... max.
Unit Display
only
P383 DO 1 source Pxxx 0 ... 700
P384 DO 1 bit selection 0000 ... FFFF
P385 DO 1 bit pattern 0000 ... FFFF
P392 DO state 0000 ... FFFF
!
Bit no. Meaning
0 1: output 1completely programmed
1 1: output 2 completely programmed
2 1: output 3 completely programmed
3 ... 7 reserved
8 actual state output 1 (X26:21)
9 actual state output 2 (X26:22)
10 actual state output 3 (X26:23)
11 ... 15 reserved