Baxi POWER HT+ Series User Manual

2. Remove the 2 screw plugs.
3. Remove the 2 magnetic bars from their housings.
4. Place a container with sufficient capacity underneath the low-loss
header vent valve.
5. Open the vent valve.
6. Allow the flow to continue until no more dirt is present.
7. Close the vent valve.
8. Refit the 2 magnetic bars in their housings.
9. Refit the screw plugs.
Fig.189
MW-4000310-1
2
3
Fig.190
MW-4000311-1
5
4
Fig.191
MW-4000312-1
7
9
8
11 Maintenance
124 POWER HT + 7702630 - v02 - 11082018

Baxi POWER HT+ Series Specifications

General

Model	POWER HT+ Series
Category	Boiler
Installation Type	Wall-mounted
Heat Exchanger Material	Stainless Steel
Warranty	2 years
Fuel Type	Natural Gas
Control System	Integrated Control
Ignition Type	Electronic