baxter HomeChoice - Basic steps to change settings (Continued)

9. Operating Instructions – Change Program
9-6 HomeChoice APD Systems Patient At-Home Guide October 2, 2009 07-19-61-244
11. Press V to display LAST FILL VOL (Last Fill
Volume).
12. Make changes, if needed, by following Steps 4–6.
13. Press
V to display DEXTROSE.
This setting only appears if you use Last Fill.
14. Make changes, if needed, by following Steps 4–6.
15. Press
V to display # OF DAY FILLS.
This setting only appears for Hi-Dose therapies.
16. Make changes, if needed, by following Steps 4–6.
17. Press
V to display DAY FILL VOL (Day Fill Volume).
This setting only appears for Hi-Dose therapies.
18. Make changes, if needed, by following Steps 4–6.
19. Press
V to display TIDAL VOL (Tidal Volume).
This setting only appears for Tidal therapies.
20. Make changes, if needed, by following Steps 4–6.
21. Press
V to display TOTAL UF.
This setting only appears for Tidal therapies.
22. Make changes, if needed, by following Steps 4–6.
23. Press
STOP when the option or value is not
blinking to exit Change Program.
Basic steps to change settings (Continued) Display screen
LAST FILL VOL: ML
DEXTROSE: SAME
# OF DAY FILLS:
DAY FILL VOL: ML
TIDAL VOL: %
TOTAL UF: ML