19. Technical Data
19-2 HomeChoice APD Systems Patient At-Home Guide October 2, 2009 07-19-61-244
19.2.1 Extension Cords
The use of extension cords is not recommended since they reduce the available
voltage. Only heavy-duty extension cords rated for at least 1200 watts (10 Amps
@ 120V) that are no longer than 12 feet should be used.
The extension cord must have the grounding wire that mates with the grounding
plug on the HomeChoice/HomeChoice PRO APD System power cord.
19.3 System Performance
19.4 Environmental Requirements
U.S. Standard Metric
Volumetric Accuracy
Fill & Drain
Targeting:
Standard Mode: +5/–20 mL
Low Fill Mode: +5/–10 mL
Standard Mode: +5/–20 mL
Low Fill Mode: +5/–10 mL
Volume Reported:
Greater of 2% or ±10 mL Greater of 2% or ±10 mL
Display Precision Volumetric:
1mL 1mL
Fluid Temperature
Control (37°C setpoint
typical)
Normal Ambient:
Cold Ambient:
Hot Ambient:
93.2°F to 100.4°F
91.4°F to 98.6°F
95°F to 104°F
34°C to 38°C
33°C to 37°C
35°C to 40°C
Temperature Measurement Range:
41°F to 122°F 5°C to 50°C
Temperature Accuracy:
± 3.6°F ± 2°C
Fluid Temperature Control Setpoint:
95, 96.8, 98.6°F 35, 36, 37°C
U.S. Standard Metric
Operating Temperature Limits:
59°F to 96.8°F 15°C to 36°C
Operating Humidity:
15% to 85% Noncondensing
Operating Atmospheric Pressure Range:
10.2 psia to 15.3 psia 70 kPa to 106 kPa
Storage Temperature Limits:
–25°F to 130°F –32°C to 54°C
Storage Humidity:
10% to 95% Noncondensing
Storage Atmospheric Pressure Range:
7.3 psia to 15.3 psia 50 kPa to 106 kPa
Atmosphere:
Non-flammable, non-explosive, non-aerosolized with
normal oxygen concentrations. Equipment not suitable
for use in the presence of a flammable anesthetic
mixture with air or with oxygen or nitrous oxide.
To Next Page
Loading...
