EasyManua.ls Logo

baxter HomeChoice - Test the Modem Installation

baxter HomeChoice
377 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8. Operating Instructions – PRO Card and Modem
8-16 HomeChoice APD Systems Patient At-Home Guide October 2, 2009 07-19-61-244
8.4.1 Test the Modem Installation
After you install the modem, call your dialysis center to let them know you are
ready to test your modem connection. If possible, use a different phone line to call
the dialysis center, such as a cell phone.
A transfer of therapy information is initiated by the dialysis center. The center will
then request that you put the HomeChoice PRO APD System in the MODEM
CONNECT mode.
Follow the steps below to test your modem connection.
7. Turn modem power on.
Steps to test your
modem connection Display screen
1. Be sure the modem is installed properly and the
modem power is turned on.
2. Turn on the HomeChoice PRO APD System.
3. Press
V until you see MODEM CONNECT.
h NOTE: MODEM CONNECT can not occur while
your therapy is in progress.
4. Press
ENTER.
Steps to install your modem (Continued)
PRESS GO TO START
MODEM CONNECT
CONNECTING...

Table of Contents

Related product manuals