10. Operating Instructions – Make Adjustments
10-12 HomeChoice APD Systems Patient At-Home Guide October 2, 2009 07-19-61-244
Steps to set the I-Drain Alarm Display screen
1. Press
ENTER to access the MAKE ADJUSTMENTS
menu.
2. Press
V until I-DRAIN ALARM appears.
3. Press ENTER.
The volume digits blink.
(The volume blinks)
4. Press U or V to change the setting.
5. Press
ENTER to save the new Initial Drain Alarm
volume.
The blinking stops.
(Blinking stops)
6. Press V to display the next option.
– OR –
7. If you do not want to make any other adjustments,
press
STOP to exit Make Adjustments.
To Next Page
Loading...
