63
Configuration options: [Disabled] [Enabled]
CPU C3 State Support [Enabled]
Use this to enable or disable CPU C3 (ACPI C2) report to OS.
Configuration options: [Disabled] [Enabled]
CPU C6 State Support [Disabled]
Use this to enable or disable CPU C6 (ACPI C3) report to OS.
Configuration options: [Disabled] [Enabled]
CPU C7 State Support [Disabled]
Use this to enable or disable CPU C7 report to OS.
Configuration options: [Disabled] [Enabled]
Note: The C6/C7 power state will have a new minimum load spec of 0.05 Amps for the 12V2 rail. For
customer systems which do not use a PSU that meets Intel®’s minimum current load specifications,
Intel strongly suggests to disable the processors’ C6/C7 power states in your motherboard BIOS.
When the processor’s C6/C7 state is disabled, the next lowest power state will be C3 (Deep Sleep
Mode) which should be enabled.
Package C State limit [AUTO]
Package C State limit.
Configuration options: [C0/C1] [C2] [C3] [C6] [C7] [C7s] [AUTO]
Intel TXT(LT) Support [Disabled]
Enable or disable Intel TXT(LT) support.
Configuration options: [Disabled] [Enabled]
To Next Page
Loading...
