BCM RX87Q - Nb Pcie Configuration

92
3.4.2.2 NB PCIe Configuration
 PEG0 – Gen X [Auto]
Configure PEG0 Gen1~Gen3
Configuration options: [Auto][Gen1][Gen2][Gen3]
 Enable PEG [Auto]
To enable/Disable the PEG slot.
Configuration options:[Auto][Enabled][Disabled]
 Detect Non-Compliance Device [Disabled]
Detect Non-Compliance PCI Express Device in PEG.
Configuration options: [Disabled] [Enabled]
 PEG1 - ASPM [Disabled]
Control ASPM support for the PEG Device. This has no effect if PEG is not the currently active device.
Configuration options: [Disabled] [Auto] [ASPM L0s] [ASPM L1] [ASPM L0sL1]