BCM RX87Q - Page 82

82
3.4.1 PCH-IO Configuration
PCH-IO Configuration
 LAN1 Controller [Enable]
Enable/Disable LAN1 Controller
Configuration options: [Disabled] [Enabled]
 LAN1 Option-ROM [Disable]
Enable/Disable LAN1 boot option for legacy network devices.
Configuration options: [Disabled] [Enabled]
 LAN2 Controller [Enable]
Enable/Disable LAN1 Controller
Configuration options: [Disabled] [Enabled]
 LAN2 Option-ROM [Disable]
Enable/Disable LAN2 boot option for legacy network devices.
Configuration options: [Disabled] [Enabled]