Chapter 4: Maintenance 55
6. Write the date on the cap label.
338677 Rev A
Waste (A)
Space for date
7. Screw the cap assembly onto the waste container and hand-
tighten until it is fully closed.
Re-attach the alarm sensor line and waste line to the waste
container tank.
Caution: Biohazard! To prevent waste container
overpressurization, do not overtighten the trap or
attached filter cap. Tighten each component only until it
is hand-tight. Do not use sealants such as Teflon® tape
or other adhesives.
To Next Page
Loading...
