75.5695.08 IS40 IS40XL 20230627 Page 1 of 8
1
2
7
8
6
4
3
5
1. push buttons
2. LEDs
3. infrared detection (AIR)
4. radar angle
5. radar detection
6. sensor angle indicator
7. bracket
8. cable
Motion and presense sensor for automatic industrial doors
(US version)
ENGLISH
Visit website for
available languages of
this document.
IS40 / IS40 XL
IS40: for normal to high mounting 8 – 16 ft
IS40 XL: for low mounting 6.5 – 11.5 ft
DESCRIPTION
TECHNICAL SPECIFICATIONS
Supply voltage: 12 – 24 VAC +10%, 12 – 24 VDC +10% / -3%
Power consumption: < 3.5 W
Mains frequency: 50 – 60 Hz
Output:
max. contact voltage:
max. contact current:
max. switching power:
2 relays (free of potential change-over contact)
42 VAC/VDC
1 A (resistive)
30 W (DC) / 48 VA (AC)
Mounting height*: IS40: 8 – 16’
IS40 XL: 6.5 – 11.5’
Temperature range: -22 – 140 °F
Humidity: 0 – 95% non-condensing
Degree of protection: IP65 / NEMA4
DImensions: 3.75” (W) × 4” (H) × 5” (D)
Materials: ABS and polycarbonate
Weight: 14 oz
Cable length: 32’
Norm conformity: R&TTE 1999/5/EC; EMC 2004/108/EC, R&TTE: 1999/5/EC
Specifications are subject to change without prior notice.
All values measured in specific conditions.
Technology: microwave doppler radar active infrared (AIR)
Transmitter frequency/
wavelength:
24.150 GHz 875 nm
Output holdtime: 0.5 – 9 s 0.5 s
Transmitter power density: < 5 mW/cm
2
< 250 mW/cm
2
Detection mode: motion presence
Detection field: IS40: 13’ × 16.5’
IS40 XL: 13’ × 6.5’
measured at 30º, field size 9,
mounting height 16’ × 11.5’
IS40: 10’ × 10’
IS40 XL: 7.5’ × 7.5’
zone detected with SPOTFINDER; therefore,
slightly larger than the effective detection field
Min. detection speed: 2 in/s 0 in/s to activate detection
Reaction time: 100 ms 250 ms
Tilt angle: -8 – 22º (relative to sensor front face) 15 – 45º
green red
To Next Page
Need help?
General
