Need help?Do you have a question about the BeaconMedaes HTM and is the answer not in the manual?
General| Brand | BeaconMedaes |
|---|---|
| Model | HTM |
| Category | Air Cleaner |
| Language | English |
Explains warning symbols used in the manual.
General safety advice and responsibilities for operation and maintenance.
Safety measures specific to the installation of the equipment.
Safety measures to be observed during the normal operation of the unit.
Safety measures to follow when performing maintenance or repair work.
Overview of the dual medical air purifier's purpose and design.
Describes the path of air through the purifier components.
Details on water separators and filters used in the system.
Information about the PD dryer component and its operation.
Details on the QDT+ filter and its function.
Information on where to find electrical diagrams.
Information on available optional equipment like electronic drains.
Describes the controller's interface, buttons, and menu layout.
Explains how to operate the purifier's main controller and its statuses/alarms.
Details about accessing and using the service menu for maintenance.
Describes the DIN rail controller's interface, buttons, and menu structure.
Explains how to operate the DIN rail controller and its screens.
Provides dimensional drawings and specifications for different models.
Recommends installation procedures and site requirements.
Details on electrical wiring and connection requirements.
Explains how to set the purge pressure and identify orifices.
Explains the pictographs found on the data plate.
General safety reminder for operation.
Illustrates the correct valve positions for startup.
Step-by-step guide for initial unit startup.
Procedure for starting the dryer after a period of inactivity.
Shows valve positions during normal operation.
Guidance on checks and actions during normal operation.
Procedure for safely stopping the air treatment unit.
Information on available service agreements and their benefits.
General maintenance guidelines, safety precautions, and warranty.
Detailed schedule for preventive maintenance tasks.
Procedure for storing the unit after installation.
Guidelines for environmentally friendly disposal of used materials.
Step-by-step procedure for servicing the water separator drain.
Procedure for changing the UD+ and PDp+ filter elements.
Instructions for changing the desiccant cartridge in the dryer.
Procedure for servicing and maintaining the QDT+ filter.
How to perform functional and alarm tests on the electronic drain valve.
Guide for identifying and changing purge plugs for specific models.
Guide for identifying and changing purge orifices for larger models.
Details on locking the air inlet/outlet valve for maintenance.
Common faults and their remedies for the PD dryer.
Common faults and remedies related to the water separator.
Common faults and remedies for filters.
Specific faults and remedies related to the QDT filter.
Common faults and remedies for ancillary components.
Faults and remedies related to the purifier's controller.
Specifies fuse values for different electrical standards.
Details minimum cable sizes required for electrical connections.
Information on factory-adjusted regulating and safety devices.
Lists reference conditions and operational limitations.
Detailed technical specifications at various inlet pressures.
General instructions and safety notes regarding dryer operation and pressure vessels.
Table specifying tightening torques and allowed deviations for bolts.
Information on pressure equipment directives and re-inspection times.
States compliance with the Medical Devices Directive.
Indicates the purifier unit's conformity to the Medical Devices Directive.
To Next Page
