EasyManua.ls Logo

BeaconMedaes HTM02-01 - Recommended Spares

BeaconMedaes HTM02-01
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
26
Emergency Reserve Manifold
2005715.05
7. Recommended Spares and
Accessories
7.1 Spares scheduling
The following table is the recommended spares
holding, the number recommended spares for
overseas customers are expressed in brackets and
take into account expected transport delays (see
table 11).
Part
Number
Description
2005887 5 Year Overhaul Kit Oxygen
2005888 5 Year Overhaul Kit Nitrous Oxide
2005889
5 Year Overhaul Kit Oxygen/Nitrous
Oxide
2005890 5 Year Overhaul Kit Medical Air
2005891 5 Year Overhaul Kit Surgical Air 7 bar
2005892 5 Year Overhaul Kit Surgical Air 11 bar
2005893 5 Year Overhaul Kit Nitrogen 7 bar
2005894 5 Year Overhaul Kit Nitrogen 11 bar
2005895 5 Year Overhaul Kit Carbon Dioxide
Note - It is mandatory to replace 1st and 2nd stage
relief valves every 5 years.
To accompany the replacement of relief valves
an overhaul kit has been dened to include non
return valves (header and main line), associated
seals/washers and outlet capsule along with the
1st and 2nd stage relief valves.
BeaconMedæs advise to replace these additional
components when the ERM is shut down for it’s
major relief valve service.
Note the kits are sized for the standard 2x1
ERM. For systems larger than this additional NRV
capsules and tailpipe seals are required for each
cylinder/tailpipe connection. See table 12 for
details.
Note - industrial regulators are recommended
to be replaced every 5 years. Whilst the medical
standards do not specically identify the need
to replace the regulators within this time scale it
should be considered good practice to do so. By
replacing the regulators whilst the relief valves
are being replaced interruption of supply is
minimised.
BeaconMedæs therefore advise that regulators
are also replaced during the 5 year overhaul of the
ERM control panel.
Part Number Descripon
8102370396
Modular Header Rack Assembly (x1)LH-RH
- O2
8102370425
Modular Header Rack Assembly (x1)LH-RH
- N2O
8102370437
Modular Header Rack Assembly (x1)LH-RH -
O2/N2O
8102370449
Modular Header Rack Assembly (x1)LH-RH
- MA
8102370461
Modular Header Rack Assembly (x1)LH-RH
- N
8102370473
Modular Header Rack Assembly (x1)LH-RH
- CO2
8102370398
Modular Header Rack Assembly (x2)LH-RH
- O2
8102370427
Modular Header Rack Assembly (x2)LH-RH
- N2O
8102370439
Modular Header Rack Assembly (x2)LH-RH -
O2/N2O
8102370451
Modular Header Rack Assembly (x2)LH-RH
- MA
8102370463
Modular Header Rack Assembly (x2)LH-RH
- N
8102370475
Modular Header Rack Assembly (x2)LH-RH
- CO2
Table 11a: Accessories
Customised arrangements
For a custom arrangement where independent
assemblies are required, accessories like the loop
connection, corner connection and free standing
conguration are available, more information could
be found on the latest Manifold Header System
installation manual.