17
Quick Start
Parts and Controls
Stability Status (4)
On the right hand side of the screen, you will nd a graph displaying the current status
of the stability of the Field Temperature Block.
Heating/Cooling Status (5)
Just below the stability graph there is a bar graph that will indicate HEATING, COOL-
ING, or CUTOUT. This status graph indicates the current level of heating or cooling if
the instrument is not in cutout mode.
Soft Key Functions (6)
The four texts at the bottom of the display (not shown) indicate the functions of the
soft keys (F1–F4). These functions change with each menu.
Editing Windows
While setting up and operating the instrument, you are often required to enter or select
parameters. Editing windows appear on the screen when necessary to show the values
of parameters and allow edits.
Figure 4 FBXXX display
3.2.3 Power Panel
The following are found on the lower front panel of the instrument (see Figures 5 and
Figure 6 on page 19).
To Next Page
Loading...
