BEAMEX FB150 - System Menu

FBXXX Field Temperature Blocks
Main Menu
32
5.2.2.3.1.4 TIME (VIEW ONLY)
The TIME the selected test was performed.
5.2.2.3.1.5 RESULTS (press ENTER)
The RESULTS menu is the second part of the VIEW TESTS menu and allows the user
to view the results of the selected test.
5.2.2.3.1.5.1 RAMP & SOAK
5.2.2.3.1.5.1.1 TEST ID
The TEST ID (TEST IDENTIFICATION) parameter allows the user to select from 16
tests to view.
5.2.2.3.1.5.1.2 WELL
The WELL (WELL TEMPERATURE) result provides the temperature of the dry-well
as measured by the control sensor.
5.2.2.3.1.5.1.3 REF
The REF (REFERENCE) result provides the temperature of the reference probe.
5.2.2.3.2 PRINT TESTS
The PRINT TESTS parameter allows the user to the option to print the selected test
results. YES enables the print option. NO disables the print option.
5.2.2.3.3 ERASE TESTS
The ERASE TESTS option is unconditionally password protected. The user has the
choice, YES/NO, to erase all of the stored tests. A warning is presented to the user
stating that all tests will be erased.
5.2.3 System Menu
The System Menu allows the user to set up the display settings, communications pro-
tocol, date/time settings (-R model only), password settings, calibrations settings, and
view system information.
5.2.3.1 SYSTEM SETUP
The SYSTEM SETUP menu contains the Display Setup, Communications Setup, and
Date/Time Setup (-R model only).