Appendix
BK9055 and BK910564 Version: 2.0.0
Working with IO data
Download the code to the controller unit. Go online to toggle IO. Keep in mind that the first DINT is the
Status for both the input and output data. At this point, if the controller is in RUN mode, toggle inputs to see
the value in "bk9105:I.Data[1]" change. One should be able to update the values in "bk9105:O.Data[1]" and
see the outputs change.
Fig.61: Example - Work with IO data
6.3 General operating conditions
The following conditions must be met in order to ensure flawless operation of the fieldbus components.
Environmental conditions
Operation
The components may not be used without additional protection in the following locations:
• in difficult environments, such as where there are corrosive vapors or gases, or high dust levels
• in the presence of high levels of ionizing radiation
Condition Permissible range
Permissible ambient temperature during operation see technical data
Installation position variable
Vibration resistance According to EN60068-2-6
Shock resistance According to EN60068-2-27
EMC resistance According to EN61000-6-2
Emission According to EN61000-6-4
Transport and storage
Condition Permissible range
Permissible ambient temperature during storage -25°C... +85°C
Relative humidity 95 %, no condensation
Free fall up to 1 m in the original packaging
To Next Page
Loading...
Need help?
General