Beckhoff EK15 Series - Fig. 33 Twincat Setting for Using this Component as Reference Clock

Basics
EK1122, EK15xx42 Version: 3.4
Fig.33: TwinCAT setting for using this component as reference clock
Activation of Distributed Clocks support
The (synchronization) procedure described here is only successful for the components described
above. The checkboxes can be set for other components, too, although the hardware does not sup-
port this function, unless specified in the respective documentation. In particularly, please note that
after commissioning the component may not be replaced with a previous version without DC sup-
port.