101 DeepMind 12 User Manual
9.3 Eects Parameters
Note: Eects parameters which appear as modulation destinations are marked with a '*'.
TC-DeepVRB (TC DEEP REVERB)
No DM12 REF PARAMETER UNITS MIN MAX DESCRIPTION
1 PST Preset — — — Options: Ambience, Church, Gate, Hall, Lo Fi, Modulated, Plate, Room, Spring, Tile, Default.
2* DCY Decay s 0.1 s 6.0 s Controls the amount of time it takes for the reverb to dissipate (range is preset dependant).
3* TON Tone % -50.0% 50.0% Enhances high frequencies/low frequencies for positive/negative settings respectivly.
4 PDY PreDelay ms 0.0 200.0 ms Controls the amount of time before the reverb is heard following the source signal.
5* MIX Mix % 0.0% 100% Controls the mix (or ratio) of wet (processed) and dry (unprocessed) signals.
* These parameters are available as modulation destinations in the Modulation Matrix
AmbVerb (AMBIENT REVERB)
No DM12 REF PARAMETER UNITS MIN MAX DESCRIPTION
1 PD PreDelay ms 0.0 200.0 ms Controls the amount of time before the reverb is heard following the source signal.
2* DCY Decay s 0.2 s 7.3s Controls the amount of time it takes for the reverb to dissipate.
3 SIZ Size — 2.0 100.0 Controls the perceived size of the space being created by the reverb.
4* DMP Damping Hz 1000 Hz 20000 Hz Adjusts the decay of the high frequencies within the reverb tail.
5 DIF Diusion — 1.0 30.0 Controls the initial reection density.
6* MIX Mix % 0.0% 100% Controls the mix (or ratio) of wet (processed) and dry (unprocessed) signals.
7* LC LoCut Hz 10.0 Hz 500.0 Hz Allows the low frequencies aected by the reverb to be reduced.
8* HC Hi Cut Hz 200.0 Hz 20000.0 Hz Allows the high frequencies aected by the reverb to be reduced.
9 MOD Mod % 0.0% 100% Controls the reverb tail modulation depth.
10* TGN TailGain % 0.0% 100% Adjusts the volume of the reverb tail.
* These parameters are available as modulation destinations in the Modulation Matrix
To Next Page
Loading...
Need help?
General
