103 DeepMind 12 User Manual
HallRev (HALL REVERB)
No DM12 REF PARAMETER UNITS MIN MAX DESCRIPTION
1 PD PreDelay ms 0.0 200.0 ms Controls the amount of time before the reverb is heard following the source signal.
2* DCY Decay s 0.2 s 4.9 s Controls the amount of time it takes for the reverb to dissipate.
3 SIZ Size -- 2.0 200.0 Controls the perceived size of the space being created by the reverb.
4* DMP Damping Hz 1000 Hz 20000 Hz Adjusts the decay of the high frequencies within the reverb tail.
5 DIF Diusion -- 1.0 30.0 Controls the initial reection density.
6* MIX Mix % 0.0% 100% Controls the mix (or ratio) of wet (processed) and dry (unprocessed) signals.
7* LC LoCut Hz 10.0 Hz 500.0 Hz Allows the low frequencies aected by the reverb to be reduced.
8* HC Hi Cut Hz 200.0 Hz 20000.0 Hz Allows the high frequencies aected by the reverb to be reduced.
9* LFX BassMult -- 0.5 2.0 Controls the low frequency build-up.
10 SPR Spread -- 0.0 50.0 Emphasizes the stereo eect of the reverb.
11* SHP Shape -- 0.0 250.0 Adjusts the contour of the reverberation envelope.
12 MOD ModSpeed -- 0.0 100.0 Controls the reverb tail modulation rate.
* These parameters are available as modulation destinations in the Modulation Matrix
ChamberRev (CHAMBER REVERB)
No DM12 REF PARAMETER UNITS MIN MAX DESCRIPTION
1 PRE PreDelay ms 0.0 200.0 ms Controls the amount of time before the reverb is heard following the source signal.
2* DCY Decay s 0.3 s 28.9 s Controls the amount of time it takes for the reverb to dissipate.
3 SIZ Size m 4.0 m 76.0 m Controls the perceived size of the space being created by the reverb.
4* DMP Damping Hz 1000 Hz 20000 Hz Adjusts the decay of the high frequencies within the reverb tail.
5 DIF Diusion % 0.0% 100% Controls the initial reection density.
6* MIX Mix % 0.0% 100% Controls the mix (or ratio) of wet (processed) and dry (unprocessed) signals.
7* LC LoCut Hz 10.0 Hz 500.0 Hz Allows the low frequencies aected by the reverb to be reduced.
8* HC Hi Cut Hz 200.0 Hz 20000.0 Hz Allows the high frequencies aected by the reverb to be reduced.
9* LFX BassMult -- 0.2 4.0 Controls the low frequency build-up.
10 SPR Spread -- 0.0 50.0 Emphasizes the stereo eect of the reverb.
11* SHP Shape -- 0.0 250.0 Adjusts the contour of the reverberation envelope.
12 SPI Spin % 0.0% 100% Controls randomization / modulation eects within the reverb.
* These parameters are available as modulation destinations in the Modulation Matrix