Behringer DEEPMIND 12 - Page 105

105 DeepMind 12 User Manual
GatedRev (GATED REVERB)
No DM12 REF PARAMETER UNITS MIN MAX DESCRIPTION
1 PD PreDelay ms 0.0 200.0 ms Controls the amount of time before the reverb is heard following the source signal.
2 DCY Decay ms 140.0 ms 1000.0 ms Controls the amount of time it takes for the reverb to dissipate.
3* ATK Attack — 0.0 30.0 Adjusts the contour of the reverberation envelope.
4* DEN Density — 1.0 50.0 Manipulates the reection density in the simulated room.
5 SPR Spread — 0.0 100.0 Emphasizes the stereo eect of the reverb.
6* MIX Mix % 0.0% 100% Controls the mix (or ratio) of wet (processed) and dry (unprocessed) signals.
7* LC LoCut Hz 10.0 Hz 500.0 Hz Allows the low frequencies aected by the reverb to be reduced.
8* HIF HiSvFreq Hz 200.0 Hz 20000.0 Hz Adjusts the frequency of a Hi-Shelving lter at the input of the reverb eect.
9* HIG HiSvGain dB -30.0 dB 0.0 dB Adjusts the gain of a Hi-Shelving lter at the input of the reverb eect.
10 DIF Diusion % 0.0% 100% Controls the initial reection density.
* These parameters are available as modulation destinations in the Modulation Matrix
Reverse (REVERSE REVERB)
No DM12 REF PARAMETER UNITS MIN MAX DESCRIPTION
1 PD PreDelay ms 0.0 200.0 ms Controls the amount of time before the reverb is heard following the source signal.
2 DCY Decay ms 140.0 ms 1000.0 ms Controls the amount of time it takes for the reverb to dissipate.
3* RIS Rise — 0.0 50.0 Controls how quickly the eect builds up.
4 DIF Diusion — 1.0 30.0 Controls the initial reection density.
5 SPR Spread — 0.0 100.0 Controls how the reection is distributed through the envelope of the reverb.
6* MIX Mix % 0.0% 100% Controls the mix (or ratio) of wet (processed) and dry (unprocessed) signals.
7* LC LoCut Hz 10.0 Hz 500.0 Hz Allows the low frequencies aected by the reverb to be reduced.
8* HIF HiSvFreq Hz 200.0 Hz 20000.0 Hz Adjusts the frequency of a Hi-Shelving lter at the input of the reverb eect.
9* HIG HiSvGain dB -30.0 dB 0.0 dB Adjusts the gain of a Hi-Shelving lter at the input of the reverb eect.
* These parameters are available as modulation destinations in the Modulation Matrix