Behringer ULTRADRIVE PRO DCX2496 - Page Lock Functionality; Global Lock Functionality

DCX.Server 2/DCX.Client 2
www.stute-engineering.de
Chapter
: Software screens
10
3.1.2 Functions
1
LED Network connection status
Green: Connected to the DCX.Client
Yellow: Not connected to the client
Red: Network issues
8
DCX2496 Device Id: DCX.Server is
currently connected to the displayed
DCX device Id
2
LED RS232 interface status
Green: Displayed RS232 port (e.g.
COM10) successful opened
Yellow: Searching DCX2496 devices
Red: Displayed COM port not found or
in use via another software
9
Name of the DCX.Client: Connected
currently with the displayed DCX.Client
name (name from the client software
“Settings” and “User name”)
3
LED DCX2496 communication status
Green: Successfully connected with the
DCX2496 device
Red: DCX currently not connected
/DCX powered off.
10
Status messages: Notifications and
error messages
4
Server IP address
Must be a valid address of your local
network. Otherwise select the correct
one from the list
11
Quit the program
5
Port number. Default 40000. Must be
identical to the port from the client
software
12
View the online PDF user manual via a
click into the image.
6
RS232 Port: Press the button, to select
the RS232/COM port for the USB-RS232
interface. The current port number is
displayed above of the button
13
Click at the device image displays the
software installation key and
DCX.Server software version.
7
Password protection for the settings:
Server IP, Port and COM port. Set the
password and re-start DCX.Server.
Reset the password via a two times
“blank” input.
14
Mouse click at the interface, empty
space, changes the user interface
style.
Note: The LED “Network” and “RS232” flashes during the communication with the DCX2496.