Behringer ULTRADRIVE PRO DCX2496 - 3 x Bi-Amp Operation (LCR;Triple Bi-Amping)

DCX.Server 2/DCX.Client 2
www.stute-engineering.de
Chapter
: Software screens
20
3.2.6.4 Tab „Password“
1
Password: Protect some functions via a
password entry: “Connect/Read..”,
and “Shut down”.
The password is set, when both
password entries “Password” and
“Password confirmation” are the same
and the text “Password” lit green.
2
Change: Press the button “Change” to
set or erase an existing password.
Erase the password input via a two
times blank password entry.
Change an existing password: Enter
first the existing password. Afterwards
enter the new password.
3.2.7 File dialog
Dialog screen to select a file with DCX2496 settings. The settings are transferred to the device
afterwards. You open the dialog via the button “To DCX” from “Preset File” of the “Home”
tab.